XLX 200HP

Help With This Product


Product Literature

Specifications


Depth Rating: 3000 (4000) msw
Power: 200 hp
Through Frame Lift: 3000 kg
Control System: Single Mode Fiber Optic PC Based
Payload Capacity: 300 (250) kg

Dimensions  
Length: 3605 mm
Width: 1905 mm
Height 2282 (2333) mm
Depth Rating: 3000 (4000) m
Weight in Air: 5500 (5662) kg
Payload Capacity: 300 (250) kg
Power Pack: 200 Shaft hp
Thruster Horizontal: 4 x 380 mm
Thruster Vertical: 4 x 305 mm
Bollard Pull (Nominal)  
  Forward: 1050 kgf
  Lateral: 1050 kgf
  Vertical: 940 kgf
Lift Capacity: 3000 kg

Standard Fit

  • Pitch/Roll Sensor
  • Digiquartz Depth Gauge
  • Auto Functions (Heading/Depth/Altitude/Position)
  • General Function Valve Pack (10 Function)
  • Lighting System (3000 watts total)
  • Doppler Velocity Logger-ROV DP

Interfaces For

  • Manipulator (Left/Right)
  • Sonar
  • Hydraulic Tool Interfaces

Telemetry

  • Real-time Video Channels (8)
  • Spare Fiber Optic Interface Card Slot (2)
  • Customer Solenoid Valve Drivers (Pre-wired) (9)
  • Customer Digital Out (8)
  • Customer Digital In (8)
  • Customer Analog Out (8)
  • Customer Analog In (8)
  • Full Duplex RS232 @115pbs Data Channels (4)
  • Full/Half Duplex RS485/422/232 @115pbc Channels (4)
  • Voltage meters for input power and all switching controls
  • Auto Fiber Switch to Spare Fiber

Power Distribution

  • 140 KVA Transformer for Vehicle Hydraulics (1)
  • 6.5 KVA Transformer for Vehicle Electronics (1)
  • 7.5 KVA Transformer for TMS-HPU (1)
  • Ground Fault Detection Circuits
  • Deck Cable Interface

 

1


Available Equipment

  • Four Function Thruster Manifold (proportional valves) (2)
  • Ten Function Auxiliary Valve Manifolds (2)
  • High Flow Proportional Hydraulic Manifold
  • 500 watt lights on dimming circuits available (6)
  • Circuits w/2 x 250 watt lights per standard (6)
  • Pan and Tilt – Standard (1)
  • High Accuracy Sensor, 0.1% over full scale for depth control (auto depth) and depth determination
  • Pressure/Flow Control Manifold
  • High Flow Proportional Hydraulic Manifold

System Options

  • Main Umbilical
    • Armored/Soft
  • Surface Handling
    • 'A' Frame/Crane System
  • Winch to Customer Specification
  • Control Cabin
    • Certified/Zone Rated
  • Control Console
    • 2 to 5 Bay Ergonomically Designed Graphics/Vision/Sonar Monitors
    • Video Overlay/Switching/Recording
    • Surface Communications
    • Manipulator Control
  • Tether Management System
    • Tophat or Garage
    • 635 Meters Tether (Tophat)
    • 750 Meters Tether (Garage)
    • 3000/4000 Meters Depth Rating
  • Workskids
    • Survey & Bathymetric suites
    • Suction Pile
    • Variable Ballast
    • Jetting Module
    • Tool Interface Module

The specification details are illustrative for marketing purposes only. Actual equipment may be different as a result of product improvement or other reasons. Specific interface and performance information should be reconfirmed at time of order placement.