Triton® XLX 150HP

Triton® XLX 150HP
 
Depth Rating: /4000 MSW
Power: 150 HP
Through Frame Lift: 3000kg
Control System: ICE™ Real Time Control System with Gb Telemetry and Graphical Diagnostics
Control Modes: Heading, Depth, Altitude and Auto Position™
Payload Capacity:  250kg

Specifications

 
Dimensions  
Length: 3526mm
Width: 1893 mm
Height 2073 mm
Depth Rating: 4000 m
Weight in Air: 4900kg
Payload Capacity: 250 kg
Power Pack (Shaft/HP) 150
Thruster Horizontal: 4 x 380 mm
Thruster Vertical: 4 x 300 mm
Turning Rate: 40 deg. per second
Auto Heading Control: Automatic to ± 2.0 degree
Pitch and Roll Control: ± 5.0 degrees
Depth Control: Automatic to ± 150 mm
Altitude Control: Automatic to ± 150 mm
Bollard Pull (Nominal)  
  Forward: 1100 kgf
  Lateral: 1100 kgf
  Vertical: 900 kgf
Through Frame Lift: 3000 kgf

Standard Equipment

  • Gyro/Fluxgate Compass
  • Pitch/Roll Sensor
  • Digiquartz Depth
  • Doppler Velocity Log-ROV DP
  • Auto Functions (Heading/Depth/Altitude/Position)
  • 16 Station Proportional NG3 Main Manifold
  • 14 Station Proportional Thrusters Manifold-6 spare functions
  • 12 Station Proportional Tooling Manifold
  • 500 watt lights on dimming circuits available (6) Circuits x/2 x 250 watt lights per standard (6)

Interfaces For

  • Manipulator (Left/Right)
  • Sonar
  • Hydraulic Interfaces
  • Electric Tool Interfaces

Telemetry

  • Real-time Video Channel (8)
  • Spare Fiber Optic Wavelengths (4 total)
  • Devoted Serial Channels for Gyro, Digiquartz
  • Standard survey interfaces 12 ( 8 x RS232 4 x RS485) Various options up to 44 serial channels
  • Voltage feedback for input power and all switching controls
  • Current sensing on each channel
  • 1 Gb Ethernet survey mux
  • Various AC and DC sensor with up to 42 power channels

Power Distribution

  • 215 KVA Transformer for Vehicle Hydraulics (1)
  • 8.5 KVA Transformer for Vehicle Electronics (1)
  • 15 KVA Transformer for TMS-HPU (1)
  • 2 KVA Transformer for TMS Electronics (1)
  • Ground fault detection circuits
  • Deck cable interface
  • CB, OL and current/voltage sensor

Control System

  • Utilizes the evolutionary ICE™ Integrated Control Engine
  • Fully redundant Windows® based HMI Computers
  • Dedicated real-time controllers
  • Intuitive Graphic User Interface (GUI)
  • Advanced graphical interactive diagnostics
  • User configurable GUI
  • Ergonomic pilot/co-pilot control consoles and touch screen control interfaces
  • 4 x 40” HD Plasma video wall

System Options

  • Main Umbilical
    • Armored/Soft
  • Surface Handling
    • ‘A’ Frame/Winch to Customer specification
  • Control Cabin
    • Certified/Zone Rated
  • Control Console
    • Advanced Console or Integrated Chair Control
    • Video Wall (Four 40” LCD Monitors)
    • Surface Communications
    • Manipulator Control
  • Tether Management System
    • Tophat or Garage
    • 350 or 650 m Tether (Tophat)
    • 750 or 1000 m Tether (Garage)
  • Workskids
    • Survey & Bathymetric suites
    • Suction Pile
    • Variable Ballast
    • Jetting Module
    • Tool Interface Module
    • Telemetry

The specification details are illustrative for marketing purposes only. Actual equipment may be different as a result of product improvement or other reasons. Specific interface and performance information should be reconfirmed at time of order placement.