BM0420 Standard and Heavy Duty Bending Machines

Engine

  • Deutz F3L1011 (Std. Model)
  • Deutz F3L912 (HD Model)
  • Air Cooled
  • Dependable
  • Parts are available worldwide
  • Smooth and Quiet
  • Low Maintenance
  • Very Fuel Efficient

Structure

  • C&L Bending Machines are made from the very best material available and provide an extremely strong structure for pipe bending.

Cylinder

  • All cylinders are easily maintained and can be repaired as opposed to a closed unit which is costly to repair or replace.
  • Equipped with poly seals for positive sealing
  • Outboard : 2 Cylinders
  • Inboard : 2 Cylinders
  • Pinup Cylinder 1

Pump

  • Uses a VQ series hydraulic Vickers vane pump for bending system function.

Rubber Tires

  • Fully mobile on oversized rubber tires for added clearance.
  • 2-11" x 22.5"

Technical

  • C&L Models BM0420 will bend from 4" up to 20" (508mm), heavy wall, high yield pipe.
  • This bending machine is designed to bend each pipe size to a plus/minus 40 x pipe diameter = bend radius.

Bending Sets

  • Can be conformed and labeled to Metric System if required.

Bending Mandrels

  • Can be conformed and labeled to Metric System if required.

Air Compressor (HD Model Only)

  • Uses a QR325 Quincy Compressor for pneumatic bending mandrel function.
  • C/W 30 Gallon air receiver

Standard Dimensions

  • Length = 13' 4" (4.06m)
  • Height = 8' 6" (2.59m)
  • Width = 6' 1" (1.85m)
  • Weight = 10,000 lbs. (4,540 Kgs.)

Heavy Duty Dimensions

  • Length = 15' 5" (4.7m)
  • Height = 8' 6" (2.59m)
  • Width = 6' 1" (1.85m)
  • Weight = 12,000 lbs. (5,450 Kgs.)

Each pipe size within a machine range requires a different bending die set. Specially lined bending die sets, to prevent damage when bending pre-coated pipe, are available.